5
4. Slide the
Mode Selector
switch
to the
Record
position and make sure that the red
LED indicator
on the top panel lights. (If the
indicator does not light, replace the batteries or
use the optional AC adaptor.)
5. Hold the unit so the microphone
is
approximately 8cm (3 inches) from your
mouth and speak in a normal voice.
6. When using the conference mode, set the
Dict
Conf switch
at
Conf
position. Then, set the
Mode Selector
switch
to
Record
position
and place the unit at the center of the table or
desk.
7. When dictation or conference is completed,
slide the
Mode Selector switch
to the
Stop
position.
Note:
Recording level is adjusted automatically.
Index Function
During recording, press the
Index
button
to
record an index mark to separate the tape contents
into segments as desired. The red LED indicator
blinks for two seconds.
The index function works only with the tape speed
of 2.4cm/s.