Yog’s E-PIPE one powered by dicodes
12
(*1 ) The temperature coefficient selects the type of wire material in the range 050 to 650: When TC-mode is
selected (Main menu HCtrl=1), the user must select the wire type to be NiFe30 (320, dicodes wire), Ni200 (620),
Titanium (350), SS304 (105, V2A), SS316 (88), SS316L (92), NiFe48 (480) or “Other”. The value for “Other” is
adjusted here. Value to select = Literature-value*10E5 K. Example: Ni 6.2E-3*1/K * 10E5*K => 620.
(*2 ) Setting 1 (fastest) up to 3 without animation (visual shift effect), setting 4 slowest with shift animation.
(*3 ) When temperature controlled vaping mode is selected and with diplay mode=post/cont, the current values of
“Power”, “Temperature” and “Wire-Resistance” can be observed 4 seconds after/during the vape. In power mode,
the battery voltage, power and resistance is displayed. In Bypass mode the measured power is displayed. With
display mode = off no parameters are displayed after or during the vape.
