DIAMOND DT-688 PCI Sound Card
User Manual
TABLE OF CONTENTS
Overview
Installing the sound card
Appendix A. Hardware Information
FCC and CE Radiation Norm
FCC
This equipment has been tested and found to comply with limits
for a Class B digital device pursuant to Part 15 of Federal
Communication Commission (FCC) rules.
CE
This equipment has been tested and found to comply with the limits
of the European Council Directive on the approximation of the law of
the member states relating to electromagnetic compatibility
(89/336/EEC) according to EN 55022 class B.
FCC and CE Compliance Statement
These limits are designed to provide reasonable protection against
frequency interface in residential installation. This equipment
generates, uses and can radiate radio frequency energy, and if not
installed or used in accordance with the instructions, may cause
harmful interference to radio communication. However, there is no
guarantee that interference will not occur in a television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try and correct the interference by
one or more of the following measures:
. Reorient or relocate the receiving antenna
. Increase the separation between the equipment and the
receiver
. Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected to
CAUTION!
The Federal Communication Commission warns the user that changes or
modifications to the unit not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
Overview
Features
Chipset :
. Diamond DT-688 audio chipset
System Interface :
. 32bit PCI Bus Master, PCI 2.1 / PCI 2.2 compliant
Hardware Interface :
. Newest single chip 5.1 channel PCI sound audio solution
. HRTF-base 3D positional audio, supporting DirectSound
TM
3D, EAX™ and
A3D interface
