Boost-EQ
Clean boost / parametric EQ guitar effect pedal
User Manualv1.00 • December 22, 2007
Boost-EQ user manual v1.00
1
Страница 1: ...Boost EQ Clean boost parametric EQ guitar effect pedal User Manual v1 00 December 22 2007 Boost EQ user manual v1 00 1 ...
Страница 2: ...This became the first officially an nounced Boost EQ it had a large paddle EQ defeat switch where the middle knob usu ally goes and was shown at summer NAMM 2007 The pedal worked really well but it was decided that a little something extra was needed so an additional midrange boost cut filter was added to the EQ chain centered at the fulcrum of the tilt EQ seesaw to give a very unique parametric f...
Страница 3: ...stortion usually occurring naturally in the front end of a tube amp due to the increased input levels TILT This control provides a complete spectral tilt of the pedal s frequency response pivoted around a fixed point in the upper midrange think of it as a seesaw frequency response that can be tilted in either direction Center detent is flat moving to the left darkens the overall frequency response...
Страница 4: ...e and the clean boost or overdrive either sounds different or doesn t work at all try swapping out for a new battery 9V ADAPTER Any standard regulated 9V DC negative pin AC adapter for effect pedals can be used to power the Boost EQ The insertion of the AC adapter plug automatically removes the in ternal battery from the circuit but if you re planning to permanently power using an ex ternal adapte...
