Diamond BE-910C-DP/DI, Инструкция по установке, использованию и обслуживанию

Страница: 27 / 81

26
EN
5.4 STARTING A BLAST CHILLING OR DEEP FREEZING CYCLE
After selecting a blast chilling or a deep freezing cycle and pressing START
to start it, a screen like the one on the side is displayed.
In the example shown, a soft blast chilling with probe has been selected.
The indications provided in the screen are:
Type of cycle: blast chilling (icon ) soft
Control: probe (icon )
Chamber temperature at the top right.
Value detected by the probe (28° large in the middle of the screen)
End of cycle value (3° smaller)
The set value can be changed by pressing the probe icon.
STOP button to interrupt the cycle.
In this other example the indications are:
Type of cycle: deep freezing (icon ) hard
Control: probe (icon )
Active phase (we remind you that a hard cycle consists of a hard deep
freezing phase, a deep freezing phase and a conservation phase).
Chamber temperature at the top right.
Value detected by the probe (28° large in the middle of the screen)
End of phase value (-5° smaller)
The set value can be changed by pressing the probe icon.
STOP button to interrupt the cycle.