diamond mowers Rear Swing Flail, Руководство оператора

Страница: 9 / 52

GETTING STARTED
REAR SWING FLAIL OPERATOR’S MANUAL
MACHINE REQUIREMENTS
Diamond’s Rear Swing Flail must be used
on a tractor with a minimum weight
of 9500lbs (4310kg) (sans weights),
equipped with a category II 3-Point
hitch, and a 540RPM PTO drive.
The tractor must be rated at a minimum
of 75hp (56kW).
CONTINUED ON NEXT PAGE
MOUNTING THE ATTACHMENT
To mount the attachment to the tractor:
•
Adjust the draft beam links
(1)
(if
present) to their “float” position.
◦
NOTE: Your draft beam links
(1)
(if
present) may not look exactly the
same as this example.
•
Mount the hitch frame
(3)
to the
tractor’s 3-Point hitch draft beams
(2)
and upper link
(4)
.
•
Start the tractor and raise the hitch
frame
(3)
to the desired work height.
•
Adjust the upper link
(4)
until the
hitch frame
(3)
is plumb.
•
Raise the jack stands
(5)
up against
the hitch frame
(3)
.
◦
Whenever disconnecting the
hitch frame
(3)
from the tractor’s
3-Point hitch, use the support
stands
(5)
to support the hitch
frame
(3)
by sliding them to their
lowered position.
(1)
(4)
(3)
(2)
(5)
(5)
(5)
9