Dialogic 1000Series, Руководство пользователя

Страница: 51 / 326

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 51
Parameter Reference
An IP route rule is a custom routing rule on a specific LAN interface. It allows access to a specific
subnet that matches the destination address/mask via the specified gateway address. This rule
supplements or replaces the functionality of the default network gateway address by providing
access to multiple subnets across all LAN interfaces. The IP route rules are available on the
DMG2000 only.
Ethernet Interface
Description: Specifies the LAN interface used for the route. The “Gateway Address” must be on
the same subnet as this LAN interface.
Allowed Values:
• LAN1 = IP route will use LAN1
• LAN2 = IP route will use LAN2
Default Value = LAN1
INI File Parameter Nam e = ipRouteIf
Note: Unit requires a restart if this parameter value is changed.
Destination Address
Description: Destination IP address that is combined with the destination mask to define the
subnet range for the route. Unused bits may be set to 0.
Allowed Values: Any valid IP address in dotted decimal notation.
Default Value = blank
INI File Parameter Name = ipRouteDest
Note: Unit requires a restart if this parameter value is changed.
Destination Mask
Description: Destination IP mask that is combined with the destination address to define the
subnet range for the route.
Allowed Values: Any valid IP mask
Default Value = blank
INI File Parameter Name = ipRouteMask
Note: Unit requires a restart if this parameter value is changed.