Dialogic 1000Series, Руководство пользователя

Страница: 119 / 326

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 119
Parameter Reference
3.8.2.19 Inband CPID Complete Timeout
Description: Specifies the number of milliseconds the DMG2000 will wait for each subsequent
inband DTMF digit to arrive. If no digit is received within this time, the CPID is assumed to be
complete.
Allowed Values: 100 to 2000 milliseconds
Default Value = 300 milliseconds
INI File Parameter Name = telInbCpidEndMs
3.8.2.20 Inband Type I CID to First Ring Timeout
Description: Specifies the number of milliseconds that are allowed from the end of the Type I
CPID on the first ring. If this time is exceeded, the CPID is cleared.
Note: This parameter is only needed when CPID arrives at the Gateway before the first ring. This
parameter can be ignored if the CPID arrives between the first and second ring.
Allowed Values: 500 to 30000 milliseconds
Default Value = 2000 milliseconds
INI File Parameter Name = telPreRingDtmfCidTimeoutMs
3.8.3 T1 ISDN Protocol Group (ISDN Signaling Mode)
The parameters in the T1 ISDN Protocol group include the following:
• Line Encoding
• Framing
• Selects Transmit Pulse Waveform
• ISDN Protocol
• ISDN Protocol Variant
• Multiple Diversion Processing
• Network Specific Facilities (NSF)
• ISDN Answer Supervision Enable
• Enable Failover