Dialogic 1000Series, Руководство пользователя

Страница: 109 / 326

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 109
Parameter Reference
Turn MWI On FAC (Phone Emulating Only)
Description: Specifies the Features Access Code (FAC) to dial to turn on the Message Waiting
Indicator (MWI) of a PBX extension.
Allowed Values: Any string of less than 11 characters
Default Value = (no default value)
INI File Parameter Name = telMwiOnFAC
Turn MWI Off FAC (Phone Emulating Only)
Description: Specifies the Features Access Code (FAC) to dial to turn off the Message Waiting
Indicator (MWI) of a PBX extension.
Allowed Values: Any string of less than 11 characters
Default Value = (no default value)
INI File Parameter Name = telMwiOffFAC
Outbound Call Connect Timeout (Phone Emulating Only)
Description: Specifies the time in milliseconds that the Media Gateway will wait for a connect
event on an outbound circuit call. If no connect event is received within the time specified, the
Media Gateway will automatically transition the call to the connected state.
Allowed Values: 0 to 60000 milliseconds
Default Value = 10000 milliseconds
INI File Parameter Name = telConnectToutMs
Wait for Ringback/Connect on Blind Transfer (Phone Emulating Only)
Description: Specifies whether the gateway will wait for the detection of ringback tone or
connection before completing a blind transfer of a circuit call. If ‘Yes’ is selected, blind transfers
will wait for a ringback tone or connect event (voice) before completing the transfer. If ‘No’ is
selected, a blind transfer will be completed as soon as the destination number is dialed. Valid only
in OnAnswer connect mode.
Allowed Values: Yes, No
Default Value = Yes
INI File Parameter Name = telBlindXfrWaitConfirm