UM-GP-007
GreenPAK DIP Development Platform
User Manual
Revision 1.0
15-Sep-2021
CFR0012
23 of 30
© 2021 Dialog Semiconductor
Figure 17: Ready Project in GreenPAK Designer
Use the GreenPAK DIP Development Board to test this project. Connect USB cable to GreenPAK DIP
Development Board, if everything is correct, you will see two blinks of green LED, and then LED
becomes red. Then press “Emulation” button. This will open emulation tool. Using it you can load code
of your project to the chip.
In emulation tool from drop down menu in the right down corner select “GreenPAK DIP Development
Board”, see
