Dialog Semiconductor DA16 Series Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 80

Dialog Semiconductor DA16 Series Скачать руководство пользователя страница 21

UM-WI-056

DA16xxx FreeRTOS Getting Started Guide

User Manual

Revision 1.0

27-Oct-2021

CFR0012

21 of 80

© 2021 Dialog Semiconductor

Changing the Boot Index

Two versions of the main firmware can be stored in flash at location RTOS #0 and RTOS #1.

The “boot index” stored in serial flash selects which version of the firmware is used during the boot
process.

The “boot index” can be changed by using the

boot_idx n

command:

boot_idx 0

// sets RTOS #0 as the firmware to boot

boot_idx 1

// sets RTOS #1 as the firmware to boot

After running the

boot_idx

command, run the

reboot

command to boot the firmware that was

selected:

[/DA16200] #

boot_idx 1

// or boot_idx 0

[/DA16200] #

reboot

>>> P.TIM is relocated to RETMEM (0x20f835c0, 3)
[dpm_init_retmemory] DPM INIT CONFIGURATION(1)

Wakeup source is 0x0

******************************************************
        *             DA16200 SDK Information
        *
        * - CPU Type        : Cortex-M4 (120MHz)
        * - OS Type         : FreeRTOS 10.4.3
        * - Serial Flash    : 4 MB
        * - SDK Version     : V3.1.3.0 GEN
        * -

F/W Version : FRTOS-GEN01-01-15129-000000

* - F/W Build Time : Sep 29 2021 00:24:50
* -

Boot Index : 1

*
******************************************************

After the reboot, verify the

“Boot Index” and “F/W Version” matches the one that was selected.

4.6

Provisioning Wi-Fi

Setup for Station Mode

The Wi-Fi functions of the DA16200/600 can easily be configured by running the

Easy Setup

Wi-Fi

configuration wizard.

To configure the DA16200/600 to operate in Station Mode, open the DA16xxx debug console and
run the

setup

command at the

[/DA16xxx]

prompt and then answer the questions to complete the

setup as follows:

[/DA16200]

setup

Start the Easy Setup Wizard.

Stop all services for the setting.
Are you sure ? [Yes/No] :

Y

Enter Y to stop the services.

[ DA16200 EASY SETUP ]

Country Code List:
AD  AE  AF  AI  AL  AM  AR  AS  AT  AU  AW  AZ  BA  BB  BD  BE  BF  BG  BH  BL
BM  BN  BO  BR  BS  BT  BY  BZ  CA  CF  CH  CI  CL  CN  CO  CR  CU  CX  CY  CZ
DE  DK  DM  DO  DZ  EC  EE  EG  ES  ET  EU  FI  FM  FR  GA  GB  GD  GE  GF  GH
GL  GP  GR  GT  GU  GY  HK  HN  HR  HT  HU  ID  IE  IL  IN  IR  IS  IT  JM  JO
JP  KE  KH  KN  KP  KR  KW  KY  KZ  LB  LC  LI  LK  LS  LT  LU  LV  MA  MC  MD
ME  MF  MH  MK  MN  MO  MP  MQ  MR  MT  MU  MV  MW  MX  MY  NG  NI  NL  NO  NP
NZ  OM  PA  PE  PF  PG  PH  PK  PL  PM  PR  PT  PW  PY  QA  RE  RO  RS  RU  RW
SA  SE  SG  SI  SK  SN  SR  SV  SY  TC  TD  TG  TH  TN  TR  TT  TW  TZ  UA  UG
UK  US  UY  UZ  VA  VC  VE  VI  VN  VU  WF  WS  YE  YT  ZA  ZW  ALL

COUNTRY CODE ? [Quit] (Default KR) :

US

Enter the country code.

SYSMODE(WLAN MODE) ?
1. Station

«
...
19
20
21
22
23
...
»

Содержание DA16 Series

















































































Отзывы:

Нет отзывов