Diablo 5000B Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 48

background image

Installation

4

Diablo 5000B Real-Time Gas Analyzer Getting Started Manual

Verify the MassHunter GC/MS Installation

Before attempting to acquire data from a 5977 MSD with the MS Sensor Software, you should verify
that the MassHunter GC/MS data system is configured correctly by performing a standard autotune.

MS Sensor Software

Before installing the Real-Time Gas Analyzer MS Sensor software, read the document

“readme.txt”

in the root directory of the MS Sensor distribution USB flash drive. This document contains
installation and usage information that may not be included in the software manual or help file.

The MS Sensor Software Reference Manual is also provided on the USB flash drive. The reference
manual provides more detailed information on how to use the MS Sensor software than is included
in this Getting Started Manual.

To begin installation, run the installation program located in the root directory of the MS Sensor
software distribution USB flash drive. Follow the on-screen instructions.

Software Requirements

The MS Sensor 4.0 software is compatible with Windows 7 SP1, Windows 8/8.1, and Windows 10.

The .NET Framework 4.5.2 must be installed before trying to run MS Sensor 4.0.  The .NET
Framework will be installed automatically, if necessary, when you install the software from the
distribution media, or if you use the single-file installer.  If you use the web-based installer the .NET
Framework 4.5.2 will be downloaded automatically if necessary.  You can also download and install
the .NET Framework 4.5.2 from Microsoft using the following link:

https://www.microsoft.com/en-us/download/details.aspx?id=42642

Note

: The .NET Framework 4.5.2 is included with all versions of the Windows 10 operating system.

The MS Sensor software has been designed and tested for use on US/English versions of Microsoft
Windows operating systems.

Agilent 5977 MSD

Currently MS Sensor 4.0 only supports mass spectrometers that are controlled by the Agilent
MassHunter GC/MS data system. Instruments that are controlled by the older MSD ChemStation
software will need to be upgraded to MassHunter before they can be used with MS Sensor 4.0.

IMPORTANT:

MS Sensor 4.0 requires MassHunter GC/MS version B.07.05 or later.

Computer Requirements

The MS Sensor software will run on any computer that is compatible with the Agilent MassHunter
GC/MS software.

However, one free RS-232 serial port is required to collect sample pressure data from the pressure
sensor.

«
...
8
9
10
11
12
...
»

Содержание 5000B

















































Отзывы:

Нет отзывов

Похожие инструкции для 5000B

ORBISPHERE 3624

Бренд: Hach Ultra Страницы: 12

Бренд: QEED Страницы: 6

Бренд: HANSA-FLEX Страницы: 23

Бренд: horiba Страницы: 27

Бренд: Rhosonics Страницы: 65

Бренд: AEMC Страницы: 20

GRAND RHAPSODY PIANO

Бренд: Waves Страницы: 19

Бренд: Haltech Страницы: 20

Бренд: Oakton Страницы: 80

Бренд: i-SENS Страницы: 133

Бренд: Xsens Страницы: 84

Бренд: Leuze electronic Страницы: 68

Бренд: banjira Страницы: 2

Бренд: Dräger Страницы: 13

OptiView Series

Бренд: Fluke Страницы: 42

Бренд: IFM Страницы: 50

Бренд: Fowler Страницы: 2

Бренд: lanry Страницы: 43

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды