Di4 Vapore Stiro Trip, Инструкция по эксплуатации

Страница: 20 / 44

20
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
SOLEPLATE IS NOT
HEATING EVEN
THOUGH IRON IS
TURNED ON. Connection problem check main power supply cable,plug and
outlet.
Temperature control is in MIN
position select adequate temperature
IRON DOES NOT
PRODUCE STEAM Not enough water in tank Fill water tank
Steam control is selected in
non-steam position. Set steam control between positions of
minimum steam and maximum steam
(see “iron chart”).
Selected temperature is lower
than that specified to use with
steam. Select a higher temperature
STEAM JET AND
VERTICAL STEAM JET
FUNCTION DOES NOT
WORK Steam jet function was used
very frequently within a short
period.
Put iron on horizontal position and wait
before using steam jet function.
Iron is not hot enough Adjust to higher temperature to steam
ironing.Put iron in vertical position and
wait temperature indicator light becomes
fixed.
THE IRON LEAKING The temperature setting is too
low to produce steam. The variable steam knob must be set
on“0”position until the iron is hot.
PRODUCT DISPOSAL
This product complies with European Directive 2012/19/EU on electrical and electronic
devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the
legal framework applicable in the European Union for the disposal and reuse of waste
electronic and electrical devices. Do not dispose of this product in the bin, instead going
to the electrical and electronic waste collection centre closest to your home.
We hope that you will be satisfied with this product.