Dhollandia DH-S Series, Руководство по установке

Страница: 29 / 82

28
DHOLLANDIA
9.3 DIFFERENCES FOR DH-SSU(R) 2000-3000 KG AND DH-SK(S) 1000-2000 KG
•
For these liftgate types, the quantity of mounting brackets is increased to 4 per side.
•
Refer to the FITTING DRAWING for confirmation of the correct positioning of the mounting brackets for the sliding tubes.
•
If not available (e.g. fitting stock liftgate), refer to the TECHNICAL SUMARY to determine the positions of the mounting brackets:
1. The position of the rear mounting brackets is determined by the work position of the liftgate [1 in Figure 9.16].
2. The position of the front mounting brackets [2 in Figure 9.16] is determined by the overhang dimension (M) [3 in Figure 9.16].
When the platform is not mounted flush with the rear end of the vehicle, correct the overhang dimension, M accordingly.
3. Follow the instructions for the 2 middle mounting brackets [4 in Figure 9.16].
MIN. MAX.
D1 19
5
8
"
(500mm) 23
5
8
"
(600mm)
D2 0” 4” (100mm)
WARNING
It is important to position the mounting brackets of the sliding tubes properly. Incorrect positioning can lead to overload situations and
premature failure of the liftgate. [Figure 9.16]
#4 /
side
Figure 9.16
❷
❹
❶
❸