Dhollandia DH-AI02.04.01, Руководство по установке

Страница: 21 / 45

20
DHOLLANDIA
8.4 INSTALLATION OF THE STANDARD FIXED FRAME
8.4.1 Unpacking

Check the delivered goods immediately upon arrival. Any damages should be documented e.g. by means of photos. Contact
your national DHOLLANDIA distributor to report the incident. See contact info on page 3.

Remove the plastic wrap around the ramp.

The ramp is fixed to two transport pieces. Release the bolts and nuts and take off the ramp.
8.4.2 Positioning

Use the dimensions given in section 7.4 from page 14 onwards as reference during the positioning of the ramp.

Position the ramp in the vehicle so that the outboard edge
of the ramp frame + base plate is parallel with the rear of
the vehicle.