© 2010 DHD Deubner Hoffmann Digital GmbH
48
Series 52 - 52/XR MADI Router Manual
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
8.3.9
52-6850A - XR Comm. Controller, red.
Meaning of the LEDs of the 52-6850 Module.
1. Indicates, that the module is running. This LED blinks. Seen from left to right over the entire system, these LEDs should
blink as a moving light.
2. The LED flashes if data is transmitted or received via the upper RJ45 port.
3. The LED is on if the communication controller is connected to the controller network via the middle RJ45 connector. It
flashes if data is received.
4. The LED is on if the communication controller is connected to the DHD network via the lower RJ45 connector. It flashes
if data is received.
5. This LED shows the hardware status of the programmable logic and is permanently on if the boot process of the
programmable logic was successfully done.
6. This LED is permanently on and indicates the PLL-Lock of the controller after a reset or power on.