DHD Power Cruiser 52/XR Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 60

background image

Version 1.14.0 - 14.04.2010

39

Further Information

Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.

8.3

Meaning of the LEDs

8.3.1

52-6120A - XR Dual MADI Module, multimode

Meaning of the LEDs of the 52-6120 Module.

1. This LED is permanently on if the module is powered.

2. Indicates, that the module is running. This LED blinks. Seen from left to right over the entire system, these LEDs should

blink as a moving light.

3. LED 3 indicates, that routing kernel no. 1 is sending data to the outputs of the upper MADI port. This LED is blinking if

the first kernel starts malfunctioning. That means, the first kernel should send data to the outputs of the upper MADI
port, but it does not. If a second, redundant routing kernel is available, LED 4 indicates, that the second routing kernel
is operating now.

4. Normally, the first kernel should send data to the outputs of the upper MADI port. If the first kernel is malfunctioning,

LED 4 indicates, that routing kernel no. 2 is sending data to the outputs of the upper MADI port.

5. The LED indicates, that routing kernel no. 1 is locked to the inputs of the upper MADI port.

6. If a redundant kernel is installed, this LED indicates, that routing kernel no. 2 is locked to the inputs of the upper MADI

port.

7. LED 7 indicates, that routing kernel no. 1 is sending data to the outputs of the lower MADI port. This LED is blinking if

the first kernel starts malfunctioning. That means, the first kernel should send data to the outputs of the lower MADI
port, but it does not. If a second, redundant routing kernel is available, LED 8 indicates, that the second routing kernel

«
...
40
41
42
43
44
...
»

Содержание 52/XR





























































Отзывы:

Нет отзывов

Похожие инструкции для 52/XR

Бренд: ICP DAS USA Страницы: 14

Бренд: ICP DAS USA Страницы: 25

Бренд: ICP DAS USA Страницы: 15

Бренд: ICP Страницы: 14

Бренд: Salto Страницы: 2

Бренд: Lancom Страницы: 70

Бренд: Patton electronics Страницы: 12

UniFi WiFi BaseStation XG

Бренд: Ubiquiti Страницы: 19

Emotron OSTO 100

Бренд: CG Страницы: 112

Airborne M2M ABDN-er-DP55 Series

Бренд: B+B SmartWorx Страницы: 120

Бренд: rtd Страницы: 28

Бренд: Planet Страницы: 16

Бренд: Vivotek Страницы: 46

Бренд: C&H Technologies Страницы: 50

Бренд: Teldat Страницы: 47

Бренд: COMBA Страницы: 57

Бренд: New Media Technology Страницы: 26

Bipac 74 Series

Бренд: Billion Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды