Dh-Robotics PGS-5 Скачать руководство пользователя страница 2

Страница: 2 / 4

Tel/Fax: 0755-82734836

www.dh-robotics.com

Figure 1.1 PGS-5

1.1 Dimension description

The dimension drawing of clamping claw body is shown in Figure 1.2, and the dimension drawing
of control box is shown in Figure 1.3.

Figure 1.2 dimension diagram of electromagnetic gripper

Содержание PGS-5

Страница 1: ...m clamping force It can only control the opening and closing as shown in Figure 1 1 The specific parameters are shown in Table 1 1 1 1 PGS 5 specifications PGS 5 specifications Gripping force per jaw...

Страница 2: ...com 2 Figure 1 1 PGS 5 1 1 Dimension description The dimension drawing of clamping claw body is shown in Figure 1 2 and the dimension drawing of control box is shown in Figure 1 3 Figure 1 2 dimensio...

Страница 3: ...control inside the control box as shown in the red box in Figure 2 2 below The IO input signal of gripper can be set to NPN or PNP Input 0V valid or 24V valid Instructions Indicator When the signal i...

Страница 4: ...wires are led out from the control box respectively which are 24V GND and h l Se 1 and se 2 currently have no outgoing lines which can be used to expand the connection sensor of control box or not co...