DH Instruments GFS2102 Скачать руководство пользователя страница 159

Страница: 159 / 206

5. GFS TOOLS SOFTWARE

Page 143

5.6.1

RUN TEST

The

[RUN] [RUN TEST]

selection in GFS Tools is used for running automated test scripts as

setup by the

Test Definition Editor

(see Section 5.5.2). Automated test scripts are intended

to operate without operator interaction once the test has been initiated.

In GFS Tools, select

[RUN] [RUN TEST]

which will bring up the <

Setup Test

Definition> <GFS Setup>

window (see Figure 97). Select the Reference Gas Cylinder

to be used from the Gas Cylinder drop-down selection. If new hardware is in use since
the previous test, i.e. a different DUT molbloc, or a different test is to be run than
previous, then click the “

Clear Previous Selections

” button to remove all settings and

selections from the previous test. If re-running a previous test then after
selecting/verifying the Gas Cylinder click “

Finish

”, otherwise click “

Next

”.

Selecting a Reference Gas Cylinder other than the actual Cylinder in use will not harm the

system, but will drastically affect the accuracy and uncertainty of the readings due to incorrect
buoyancy and mass corrections.

Figure 97:

Run Test - Setup Test Definition window

Содержание GFS2102















































































































































































































Результаты поиска

Содержание GFS2102

Отзывы:

DH Instruments GFS2102, Руководство по эксплуатации и обслуживанию, Страница: 159 / 206

Результаты поиска

Содержание GFS2102

Отзывы: