DH Instruments GFS2102, Руководство по эксплуатации и обслуживанию, Страница: 133 / 206

5. GFS TOOLS SOFTWARE
Page 117 © 2007 DH Instruments, a Fluke Company
Table 46. Device Editor, [Calibration] Tab Fields
FEATURE DESCRIPTION
Calibration Date
(optional calendar
selection)
Enter the calibration date of the instrument. In most cases, the date of the last calibration
should be entered. The date is always formatted according to the host computer’s short
date format selected in the Windows™ Control Panel under Regional Settings.
Press the down arrow to select the date by using a calendar. Use the horizontal scroll
bars to change months. Click the year at the top of the calendar to display a vertical scroll
bar. Use this scroll bar to select the year.
Figure 74. Date Selection
Calibration Due
Date
(optional calendar
selection)
Use the calendar selector to specify the next calibration date of the device. If this date is
less than the current test date,
GFS Tools considers the devices “out of calibration”.
Calibration
Performed By
(optional text entry)
Identify the user that performed the calibration of the device.
Ceritifcation ID
(optional text entry)
Enter any relevant document tracking information associated with the <Calibration Date> .
The information entered is available on calibration reports.
Calibration
Setting1
(optional
text/numeric entry)
Enter calibration coefficients or settings specific to the output of an instrument. The data
can be text or numeric. There are no specific formatting requirements. The field is
frequently used to store adder and multiplier values of a device.
Calibration
Setting2
(optional
text/numeric entry)
See <Calibration Setting1> .
Calibration
Setting3
(optional
text/numeric entry)
See <Calibration Setting1> .
Calibration
Setting4
(optional
text/numeric entry)
See <Calibration Setting1> .
Record Last Edited
Date
(display only)
The date of the last edit of the device. This field is used for display purposes only. GFS
Tools automatically updates this field when changes are saved.
5.5.3.3 [COMMUNICATIONS] TAB
Select the desired data acquisition type and enter the settings appropriate for the
selection. By default,
GFS Tools will perform all communications with the device
following the data acquisition type specified. Automated remote interfaces such