DH Instruments GFS2102, Руководство по эксплуатации и обслуживанию, Страница: 121 / 206

5. GFS TOOLS SOFTWARE
Page 105 © 2007 DH Instruments, a Fluke Company
If a Test Definition similar to the one to be created exists, use the [Copy]
toolbar icon to copy the existing Test Definition into a new Test Definition with the
same characteristics. Then make the edits specific to the new test. Don’t forget to
change the <Record Label> prior to saving.
5.5.2.2 EDITING TEST DEFINITIONS
Edit test whenever GFS Tools is not in an active run mode. Use the [Setup],
[Test] menu option to display the Test Editor if it is not already open. Simply
changing information in the Test Editor places the Editor in the edit mode. No
specific option need be selected to begin editing a Test Definition. Use the
[Save] icon to store the edits or press the [Restore] icon to return the test to its
original state.
5.5.2.3 TEST POINT SEQUENCE
The points table displays on the left panel of the point Test Definition Editor .
Define up to 10 flow points in a single Test Definition. Use the [Data] tab to
customize data collection and accumulation information for each flow point.
Define up to 10 accumulations for each flow point.
Press the [Insert] button to insert a point in the test point sequence. Double
click a point to remove it from the test point sequence.
Accumulation information for a flow point is defined on the [Data] tab. The
[Data] tab displays accumulation information for the actively selected flow point.
Figure 66. Test Definition Editor, Point Sequence
5.5.2.4 [PRE-TEST] TAB
The Test Editor, [Pre-Test] tab defines operations that occur before a test
begins. The selections are intended to help ensure the validity of the data
collected during the test (see
Figure 66 ).