DH Instruments GFS2102, Руководство по эксплуатации и обслуживанию, Страница: 112 / 206

GFS2102™ OPERATION AND MAINTENANCE MANUAL
© 2007 DH Instruments, a Fluke Company Page 96
FEATURES DESCRIPTION
Properties
(button)
Displays the plot properties dialog to allow non data related plot properties to be edited.
Plot Description
(required text entry)
Displays the text used select plots and to use as the plot title. Make sure the text in this
field accurately represents the selected plot.
3D Plot
(check box)
Check this box to crate a 3D plot. The box is not checked, it is assumed that a 2D plot
will be created.
X Axis Data
(list box)
Select the data that will display along the X axis. The text of the selection followed by
units (when selected) will appear along the X axis. Press the button next to the drop
down list to change the text to associate with
<X Axis Data> .
Y Axis Data
(list box)
Select the data that will display along the Y axis. The text of the selection followed by
units (when selected) will appear along the Y axis of the plot. Press the button next to
the drop down list to change the text to associate with
<Y Axis Data> .
Y2 Axis Data
(list box)
Select the data that will display along the secondary Y axis. This axis is labeled on the
right side of a plot. The text of the selection followed by units (when selected) will
appear along the right side of the plot. Press the button next to the drop down list to
change the text to associate with
<Y2 Axis Data> .
Z Axis Data
(list box)
Select the data that will display along the Z axis. The text of the selection followed by
units (when selected) will appear along the Z axis. Press the button next to the drop
down list to change the text to associate with
<Z Axis Data> .
5.3.3.4 PLOT POINTS
Use the toolbar or [Options] menu to display the Plot Points dialog. The
features on this form allow the selection of which points, Data Files and point
cycles to include in a test data plot. The tabs available on this display vary with
the information stored in the Data File.
The [General] tab contains features to apply tolerance, subset and legend
options. The remaining tabs contain point, accumulation and flow values to
include in the plot. Check options that you wish to include in the plot and
uncheck options that you do not wish to include in the plot. Multiple selections
are available on only one tab other than the
[Points] tab. This limit is imposed to
restrict the number of points on a plot. For example plotting is available for 1
flow point selected on the
[Flow Points] tab with multiple selections on the
[Accumulations] tab. In this case, all accumulations for the selected flow point
are plotted. However, selecting all flow points and accumulations will not work
as expected. Only accumulation data from the first flow point is plotted.
Only one tab other than the [Points] tab should have multiple selections. If
any one of the [Accumulation],[Flow Points], or [Data Files] tabs have multiple
options checked the other 2 tabs must have only 1 item selected. This restriction is
necessary to limit the amount of information plotted at a time.
Target flow information is automatically displayed as the plot sub-title when 1
flow point is selected.
Target flow information is listed in the plot legend when the plot legend is
turned on in the [General] tab and multiple flow points are selected.
When the selected plot type uses %Reading Error, %Span Error or DUT
Difference on the Y-Axis, an additional tab is available to plot best fit error data.