1
2
3
&
_______________________________________
.--------------------------------------
--------------------------------------,
_______________________________________
Version 1.2, Copyright © 2003. DH electronics GmbH. XLON
is a registered trademark of DH electronics GmbH. Echelon
, LON
, LonWorks
,
LonManager
, LonMark
, LonPoint
, LonTalk
, LonUsers
, Neuron, 3120, 3150 are registered trademarks of Echelon Corporation. Windows
is a registered trademark of Microsoft Corporation. Al other products and/or companies referred to herein are trademarks or registered trade-
marks of their respective companies or mark holders. Subject to changes.
In all cases the General Business Conditions of DH electronics GmbH apply.
_______________________________________
.--------------------------------------
--------------------------------------,
_______________________________________
This documentation is subject to changes without notice. The manufacturer assumes no responsibility or liability for any errors or inaccurancies
that may appear in this document.
The manufacturer shall have no liability or responsibility to the original purchaser or any other person or entity with respect to any claim, loss,
liability, or damage caused or alleged to be caused directly or indirectly by any product of the manufacturer or the accompanying documentation.
_______________________________________
.--------------------------------------
gb
/us
- 1 -
- 4 -
User’s Manual
Revision 1.2
The
1
2
3
6
adapter connects a PC with a LonWorks
®
network.
For that purpose the device has to be connected to the PC's
USB port, and driver software needs to be installed.
You will find a detailed Operating and Programming User’s
Guide for download under:
http://www.xlon.de
This package contains:
•
1
2
3
6
device
•
USB cable
•
Clamp for LonWorks
®
network connection (not at RS485
version)
•
Floppydisk/CD
•
User’s Manual
Configuring and Testing
The
1
2
3
6
adapter is supplied with the following preset-
tings:
Transceiver ID:
TP/FT-10
Automatic Flush Cancel:
!
Checking and modifying the presettings
•
Start the device manager and open the "Properties“ win-
dow of the
1
2
3
6
Adapters adapter
(see also "Driver update")
•
You find the settings at the "Properties“ tab
•
Change these, if necessary
•
Save changes by clicking the "OK" button
Testing the
1
2
3
6
adapter
The main functions of the
1
2
3
6
adapter can be tested
with the buttons "Service Pin" and "Test Device" under the tab
"Properties" (see also "Checking and modifying the preset-
tings").
You will find more detailed informations in the comprehen-
sive User’s Guide.
Technical specifications
Bus interface:
USB conform, according to
USB specification 1.1, 12 Mbit/s
Network interface:
EIA 709 conform
FTT-10A (DH-199-300-WM-FTT10A)
RS485 (DH-199-300-RJ-RS485)
Operating
temperature:
+0° C to +70° C
Non-operating
temperature:
-45° C to +85° C
Maximum humidity: 90% at +50°C non-condensing
Listings:
CE mark and FCC mark