DGSHAPE DWX-4, Руководство пользователя

Страница: 9 / 53

Description of SETTINGS Window
9
Chapter 1 Operation screen
"Override" Tab
In this tab, you can adjust the "Cutting speed" and "Spindle speed" during cutting. This is useful when you want to change
the feed rate or speed as you monitor the status of cutting.
An override value is specified as a percentage. For example, when the command in the cutting data sent from the computer
is for a speed of 10,000 rpm, specifying an override of 150% produces an actual speed of 15,000 rpm.
When more than one machine is connected, the machine selected in the top window is the target of these operations.
Cutting speed
The moving speed of the tool during the cutting of workpieces can be adjusted. With the speed defined in the cutting data
regarded as 100%, the larger the value, the higher the speed, and the smaller the value, the lower the speed.
Spindle speed
The spindle speed during cutting can be adjusted. With the speed defined in the cutting data regarded as 100%, the larger
the value, the higher the speed, and the smaller the value, the lower the speed.

When the milling machine is turned OFF, the override is returned to 100%.

In the top window, not the rotation speed of the spindle after override, but the one specified by the cutting data is displayed.

Setting an override does not let you perform operation beyond the machine's maximum or minimum speeds.
Clicking these buttons adjusts the values.