DGSHAPE DWX-4, Руководство пользователя

Страница: 38 / 53

Periodic Maintenance
38
Chapter 3 Maintenance
3.
Close the maintenance cover.

Close the maintenance cover.
Remove the screw securing the cover. Close the cover slowly
with both hands.

Secure the maintenance cover.
Secure the cover with the screws.
Replacing of the Spindle Unit
Recommended Replacing Interval

When the total working time of the spindle exceeded 2,000 hours (slightly different depending on the
work situation.)
The spindle unit and the belt are parts that wear out. You can use VPanel to view the total working time of the spindle. Refer
to this to determine when replacement is needed. Refer to the manual included with the spindle unit for replacement.
Checking the total working time of the spindle using VPanel