DGSHAPE DWX-4, Руководство пользователя

Страница: 13 / 53

Description of SETTINGS Window
13
Chapter 1 Operation screen
"Tool management" Dialog
By selecting a tool to be used in this dialog, the work time of the tool selected will be automatically recorded. In addition,
when the tool reached the preset replacement time, a warning message will be displayed. When more than one machine is
connected, the tool of the machine selected on the top window will be managed.
Tool to use
A tool whose work time will be counted can be selected from among the tools registered in . ( #1 to #4 are tool numbers.)
Select a tool according to the tool set in the stocker. The name and work time/replacement time of the tool selected will
be displayed on the screen.
When you do not use this function, select No tool (leave the box blank).
*#3 to 4 are used when using ZAT-4D (4 position ATC) which is an optional item.
Work time / Replacement time
The work time and replacement time of the tool selected in will be displayed. The replacement time of the tool can be
changed from "Tool registration" of . After a tool was replaced with a new one, click on "Reset" to set the work time at 0.
Tool registration
The tool for managing work time can be registered or deleted. Click on this button, and the "Tool registration" dialog
will open.

P. 8, ""Settings" Tab"