DGSHAPE DWX-4, Руководство пользователя

Страница: 11 / 53

Description of SETTINGS Window
11
Chapter 1 Operation screen
"Mail" Tab
In this tab, you can make the setting to receive e-mails notifying that cutting is completed or an error has occurred. When
more than one machine is connected, the machine selected in the top window is the target of the setting.
When a check is put in [Send mail], you can enter each item. For information on the input values, see the table below.
Receiver address
The e-mail address of an e-mail receiver. You can input more than one address by
separating with comma.
Sender address
The e-mail address used in the computer which presently makes the settings of
VPanel.
(It is an e-mail sender address. It must be an e-mail address from which e-mails can
be sent to the e-mail sending server explained below.)
Server host name
The e-mail sending server name (SMTP server name) of the mail software used in
the computer which presently makes the settings of VPanel.
Server port number
The e-mail sending server port number of the mail software used in the computer
which presently makes the settings of VPanel.
Use SSL connection
Put a check mark, and the security-protected connection (SSL) will be used. Follow
the settings of the mail software used. Follow the settings of the mail software used.
Use SMTP authentication
User name / Password
Put a check mark, and authentication will be used to send e-mails. Input the user name
and password for authentication. Follow the settings of the mail software used.
Click [Send test] to perform the sending test. If the e-mail with the following data arrives at the address specified in "Re-
ceiver address," the setting is complete.
When an e-mail failed to be sent, the "Windows Script Host" error window is displayed. Check the input items again.
Note
* The sending of e-mails may become impossible due to settings of the security software, etc.
If e-mails cannot be sent, check the settings of the security software used as anti-virus software.
* Consult with the network administrator about details of e-mail settings.
* VPanel does not support TLS connections (STARTTLS).
Subject : <Name of the machine> Text : Test