DFSK Seres 3 2019, Руководство пользователя, Страница: 82 / 233

Instrument and Control Switch
- 81 -
Indicator
ABS fault indicator
When the brake is stepped down and the
motor start-stop button is set at “ON”,
ABS fault indicator / operation status
indicator is on and will be off about 3s
later, indicating that ABS works normally.
Driver running or driving process, ABS
fault indicator is on, indicating that ABS
works normally.
When ABS system is faulted (ABS fault
indicator is on, and EBD fault indicator is
off), the anti-lock function will be invalid.
The brake system works under EBD brake
force distribution mode, but it has no
anti-lock function. Please contact the
service stations authorized by DFSK for
inspection.
Warning
Driver running or driving process, ABS
indicator or EBD indicator is on or both of
them are on, indicating that ABS/EBD
system works normally. Then, the brake
system is under dangerous condition,
please do slow down to park and contact
the service stations authorized by
Chongqing Jinkang at once for inspection.
(Refer to “Brake System” in “6. Starting
and Driving”)
Brake liquid level warning light / EBD
fault indicator
During driving process, when brake liquid
level indicator is on, park your car at once
as far as possible, turn off motor and check
brake liquid level. If the brake liquid level
lowers the minimum level on liquid
storage tank, please add brake liquid as
required (refer to “Brake Liquid” in “9.
Maintenance and What You Can Do”).
Operating indicator of brake vacuum
controller
During driving process, when the brake
vacuum is insufficient or the controller
fails, the operating indicator will flicker or
stay on, and the brake does not have power
(the brake pedal is hard to be stepped
down), you need to stop your car as
quickly and safely as possible, turn off
power, and contact the service stations
authorized by Chongqing Jinkang for
inspection.
Warnings
●
You will have decided that your car
is safe, but you’d better track your car with
other cars, because there may be potential