DFSK Seres 3 2019, Руководство пользователя, Страница: 204 / 233

Description of Charging and Discharging
- 203 -
Warnings

Please charge in a relatively safe
environment without liquid, fire and others.
Please stop using the device immediately
when the discharge is abnormal

Do not modify or remove the
charging equipment and related ports to
avoid charging failure and fire.

Before charging, please make sure
that there is no damage or impact of water,
foreign matter or metal terminal rust or
corrosion in the charging port of vehicles,
power supply device and charging
equipment, which are not allowed to
charge. Because the abnormal terminal
connection may lead to short circuit or
electric shock threatening life safety.

If any abnormal smell or smoke
coming from the car while charging,
please stop charging immediately.

To avoid serious personal injury,
please note the following when charging:
do not touch the charging port.

When there is a thunderstorm, please
do not charge or touch the vehicle, because
lightning strike may damage the charging
equipment and cause personal injury.

After charging, do not disconnect the
charging equipment with wet hands or
standing in water, otherwise you may
suffer from electric shock and personal
injury.

Please make sure that the charging
equipment is disconnected from the
charging port of the vehicle before driving.

It is forbidden to use medical
equipment in car when charging.
Notes for Charging
When the SOC indicator bar of the
integrated instrument enters the red
warning box, it indicates that the power
battery is insufficient. It is recommended
to charge in time when the power capacity
drops to the red warning box to ensure that
you will not be unable to drive due to
insufficient power. It is not recommended
to charge after the power capacity is
completely exhausted, otherwise the
service life of the power battery will be
affected.
When the battery temperature is higher
than 65℃ or lower than -20℃, the vehicle
will not be able to charge normally.
Household AC charging is charged by the
AC charging equipment equipped. It is
recommended to use 220V 50Hz 16A AC