DFSK Seres 3 2019, Руководство пользователя, Страница: 162 / 233

Appearance and Maintenance
- 161 -
such film with glass cleaner and soft cloth.
Warning
When cleaning inside of window, don’t
use sharp tools, grinding detergent or the
detergent with chlorine. Such may damage
electrical conductivity, such as the electric
defroster of rear windows.
Seat Belt
Warnings
●
Don’t allow the wet seat belt to go
back to the retractor.
●
Don’t wash seat belt with decolorizer,
dye or chemical solution which may
weaken the strength of seat belt.
Wipe the seat belt with foam rubber
soaked with soft soap-suds.
Before using seat belt, fully dry it at under
a shelter (see details in Chapter II “Seat
Belt”).
Protection against Corrosion
Primary Causes for Vehicle
Corrosion
●
The wet dirt and debris accumulate
on section, empty cavity or other places.
●
The gravel, broken stone or minor
traffic accident damages surface and other
protective layers.
Environmental Factors Affecting
Corrosion Rate
Wet
The sand, dust and ponding water
accumulated on floor will accelerate the
rust of car body. The wet carpet / pedal
cushion cannot be dry fully, so they must
be dry outside to avoid floor rust.
Relative Humidity
There is a serious corrosion in the district
with a higher humidity.
Temperature
The increasing temperature will speed up
the corrosion rate of parts at the location
with improper ventilation.
The corrosion rate will be faster too in the
district with a constant temperature over
0℃.
Air Pollution
The industrial pollution, air salt of coastal
areas, and road salt will also speed up the
corrosion rate. The road salt will speed up
surface ageing.
Protection Vehicle from
Corrosion
●
Regularly washing and waxing the
car to keep it clean.
●
Regularly check if the surface is
damaged slightly; if any, repair it as