DFSK Seres 3 2019, Руководство пользователя, Страница: 152 / 233

Emergency Measures
- 151 -
to contact the vehicle. Place the jack on
ground stably.
2. Align the jack’s top to the supporting
point as shown in figure.
3. Set the lewis of jack onto the edge of
side beam to avoid side slipping in lifting.
4. Use the wheel nut wrench to
anti-clockwise the nut to screw off the nut
of each wheel.
Don’t remove the wheel nut when lifting
the tire from the ground.
5. When lifting the car, please grasp the
crank with your hands and then turn the
crank.
6. Carefully lift the car until that the tire
fully leaves from ground.
Tire Removal
1. Remove the wheel nut wrench.
2. Remove the damaged tire.
Attention
The tire is heavy, so keep your feet away
from it, and wear gloves if necessary to
avoid injury.
Spare Tire Installation
Warnings
●
Don’t use the not original wheel nut,
because the improper wheel nut or
screwing up nut may get the wheel flexible
or leaving the car body, and accordingly
result in accident.
●
Don’t coat oil or lubricating grease
onto wheel bolt or nut, which may get nut
flexible.
1.
Remove the soil and dust from wheel
surface.
2.
Carefully install the spare tire, screw
up nut with hands, and check if all nuts
contact tire surface.
3.
Use wheel nut wrench to alternatively
and evenly screw up nut (
①
-
④
-
②
-
③
-
⑤
) for at least two times, until that the
nuts are fully screwed up.
Jack
Jack