
www.dfi.com
1
• One WM343-KD330/WM343-KD331 system unit
• Screw pack and SATA cable for SATA drive installation
• 1 CPU cooler and 1 system fan
• HDD mounting screws
Package Contents
Panel
Rear View
(WM343-KD330/WM343-KD331)
Expansion card slot
DVI-I
(DVI-D signal)
DP++
SATA
drive bay
for KD331:
LAN 3
LAN 4
or
for KD330:
Line-out
Mic-in
LAN 1 LAN 2
USB 3.0 1-4
Optical drive bay
(optional)
PS/2 KB/MS
USB 2.0 1-2
COM1
VGA
Power LED (green)
HDD LED (red)
Power button
Opening the Chassis
Please observe the following guidelines and follow the procedure to open the system.
1.
Make sure the system and all other peripheral devices connected to it have been powered off.
2. Disconnect all power cords and cables.
3. Remove the top cover by uninstalling the thumb screws.
Thumb screw
Quick Installation Guide
WM343-KD
DFI reserves the right to change the specifications at any time prior to the product's release.
This QIG may be based on editions that do not resemble your actual products. For the latest
revision and more details of the installation procedure, please refer to
go.dfi.com/WM343-KD330 and go.dfi.com/WM343-KD331or scan the QR codes on the right.
WM343-KD330 WM343-KD331
RESET