Introduction
1
6
1.1 Features and Specifications
1.1.1 Features
Chipset
VIA
®
82C693/82C686 enhanced AGPset (PC-133)
Processor
The system board is equipped with a 242-pin Slot 1 processor slot
for installing an Intel Pentium
II/III processor or an Intel Celeron
TM
processor. It is also equipped with a switching voltage regulator that
automatically detects 1.30V to 3.5V.
450/100MHz, 500/100MHz, 550/100MHz, 600/100MHz,
533/133MHz or 600/133MHz Pentium
®
III processor
233/66MHz, 266/66MHz, 300/66MHz, 333/66MHz, 350/100MHz,
400/100MHz or 450/100MHz Pentium
®
II processor
266/300/300A/333/366/400/433MHz Celeron
TM
processor
(SEPP for Slot 1)
System Memory
16MB to 512MB memory using VCM (Virtual Channel Memory),
unbuffered or registered DIMM
Two 168-pin DIMM sockets
Uses x64 or x72 PC SDRAM, 3.3V
: PC-66 SDRAM DIMM for 66MHz FSB processors
: PC-100 SDRAM DIMM for 100/66MHz FSB processors
: PC-133 SDRAM DIMM for 133MHz FSB processors
ECC supported (uses x72 PC SDRAM DIMM)
Note:
If you are using more than one DIMM, make sure you insert
the same type of DIMMs into the DIMM sockets. Using
different types (VCM, unbuffered or registered) of DIMMs may
cause problems.
Chapter 1 - Introduction