DFI KD171 Скачать руководство пользователя

Страница: 5 / 47

www.dfi.com

KD171

About the Package

The package contains the following items. If any of these items are missing or damaged,

please contact your dealer or sales representative for assistance.

• One KD171 board

• One Serial ATA cable (500mm)

• One Serial ATA power cable (260mm)

• One COM port cable (300mm)

• One battery addendum

Optional Items

• USB 2.0 cable

• COM cable

• SATA cable

• I/O shield

• Thermal Solution

The board and accessories in the package may not come similar to the information listed

above. This may differ in accordance with the sales region or models in which it was sold. For

more information about the standard package in your region, please contact your dealer or

sales representative.

Before Using the System Board

Before using the system board, prepare basic system components.

If you are installing the system board in a new system, you will need at least the following

internal components.

• CPU

• Memory module

• Storage device such as hard disk drive, CD-ROM, etc.

You will also need external system peripherals you intend to use which will normally include at

least a keyboard, a mouse and a video display monitor.

Содержание KD171
















































Результаты поиска

Содержание KD171

Отзывы:

Похожие инструкции для KD171

Бренды по названию

Популярные бренды

DFI KD171, Руководство пользователя

Результаты поиска

Содержание KD171

Отзывы:

Похожие инструкции для KD171

Бренды по названию

Популярные бренды