DFI KD171, Руководство пользователя

Страница: 31 / 47

www.dfi.com
Chapter 3 - BIOS Settings
KD171
30
UEFI Device Manager
Configure UEFI device with option ROM, such as LAN card, etc.
SIO NUVOTON6116D
Configure Super I/O settings in this submenu. Scroll by moving the cursor up or down to re-
veal more options.
InsydeH2O Setup Utility Rev. 5.0
F1 Help
Esc Exit
↑/↓ Select Item
←/→ Select Item
F5/F6 Change Values
Enter Select

SubMenu
F9 Setup Defaults
F10 Save and Exit
InsydeH2O Setup Utility Rev. 5.0
F1 Help
Esc Exit
↑/↓ Select Item
←/→ Select Item
F5/F6 Change Values
Enter Select

SubMenu
F9 Setup Defaults
F10 Save and Exit
UEFI Device Manager Setting
UEFI Device Manager
UEFI Device Manager
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
Fan Speed Count 4
COM Port 1
Base I/O Address
Interrupt
COM Port 2
Base I/O Address
Interrupt
COM Port 3
Base I/O Address
Interrupt
COM Port 4
Base I/O Address
Interrupt
COM Port 5
Base I/O Address
Interrupt
COM Port 6
Base I/O Address
Interrupt
WDT
Case Open
► PC Health Status
Advanced
Advanced
Exit BIOS Setup Utility and launch Device Manager !!
[OK]
Press “Enter” and “OK” to enter UEFI Device Manager setup page. More device settings can be
configured in the UEFI Device Manager, including LAN, Network Stacks, and etc.
[30]
[40]
[50]
[75]
<Enable>
<3F8>
<IRQ4>
<Enable>
<2F8>
<IRQ3>
<Enable>
<3E8>
<IRQ5>
<Enable>
<2E8>
<IRQ7>
<Enable>
<2F0>
<IRQ10>
<Enable>
<2E0>
<IRQ6>
<Disabled>
<Disabled>
↓
► Advanced ► Advanced
Note:
Network Device will not be configurable in Device Manager if "Network Stack" is
disabled in the "Boot" menu.
InsydeH2O Setup Utility Rev. 5.0
F1 Help
Esc Exit
↑/↓ Select Item
←/→ Select Item
F5/F6 Change Values
Enter Select

SubMenu
F9 Setup Defaults
F10 Save and Exit
UEFI Device Manager Setting
SYS Smart Fan Control
Boundary 1
Boundary 2
Boundary 3
Boundary 4
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
Fan Speed Count 4
CPU Smart Fan Control
Boundary 1
Boundary 2
Boundary 3
Boundary 4
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
Fan Speed Count 4
COM Port 1
Base I/O Address
Interrupt
Type
COM Port 2
Base I/O Address
Interrupt
Advanced
<Enable>
[30]
[40]
[50]
[60]
[30]
[40]
[50]
[75]
<Enable>
[30]
[40]
[50]
[60]
[30]
[40]
[50]
[75]
<Enable>
<3F8>
<IRQ4>
<RS232>
<Enable>
<2F8>
<IRQ3>
↓