28
Chapter 3
BIOS SETTINGS
User's Manual |
EB100-KU
PCI Express Configuration
Select one of the PCI Express channels and press enter to configure the following settings.
PCI Express Root Port
Enable or disable the PCI Express Root Port.
PCIe Speed
Select PCIe Speed of the current port — AUTO, Gen1, Gen2, or Gen3. This field may not appear
when the speed of the port is not configurable.
Hot Plug
Enable or disable hot plug function of the port. This field may not appear when the port does
not support hot plug.
InsydeH2O Setup Utility
Rev. 5.0
F1
Help
Esc
Exit
↑/↓
Select Item
←/→
Select Item
F5/F6
Change Values
Enter
Select
X
SubMenu
F9
Setup Defaults
F10
Save and Exit
Mini PCIE Settings.
►Mini PCIE
►GLAN WGI219LM
►GLAN WGI210AT
►M.2-M
Advanced
X
Advanced
WGI219LM
WGI210AT
Rear Panel
ME Configuration
Configure Management Engine related settings in this page.
Me Fw Image Re-Flash
Enabled
Allow the user to re-write the ME firmware.
Disabled
ME firmware re-write is not allowed.
InsydeH2O Setup Utility
Rev. 5.0
F1
Help
Esc
Exit
↑/↓
Select Item
←/→
Select Item
F5/F6
Change Values
Enter
Select
X
SubMenu
F9
Setup Defaults
F10
Save and Exit
Enable/disable to flash ME re-
gion.
ME Configuration
Me Fw Image Re-Flash
<Disabled>
Advanced
X
Advanced