14
Chapter 2
HARDWARE INSTALLATION
User's Manual |
EB100-KU
Important:
Electrostatic discharge (ESD) can damage your board, processor, disk drives,
add-in boards, and other components. Perform installation procedures at an ESD
workstation only. If such a station is not available, you can provide some ESD pro-
tection by wearing an antistatic wrist strap and attaching it to a metal part of the
system chassis. If a wrist strap is unavailable, establish and maintain contact with
the system chassis throughout any procedures requiring ESD protection.
X
Board Layout
System Board
Audio Out and Mic In
HDMI1 and HDMI2
LAN2
LAN1
12V DC-In
Power Button
Reset Button and SSD LED
Clear CMOS (JP1)
USB 6/7 (USB 2.0)
USB 3/4 (USB 3.0)
USB 1/2 (USB 3.0)
SPI Flash BIOS
SATA (Data and Power)
SSD LED
Battery
DDR4 SO-DIMM
DDR4 SO-DIMM
M.2 M Key 2280
Mini PCIe Half-size
Buzzer
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Important:
When the Standby Power LED lights up, it indicates that there is power on the
system board. Power-off the PC then unplug the power cord prior to installing any
devices. Failure to do so will cause severe damage to the motherboard and com-
ponents.
1
13
14
15
16
17
18
19
20
1
1
2
3
4
5
6
7
8
9
10
11
12
