DFI CS636-C246 Скачать руководство пользователя страница 21

Страница: 21 / 73

User's Manual |

CS636

Chapter 2

HARDWARE INSTALLATION

Audio

Rear Audio

The system board is equipped with 3 rear audio jacks (Line-in, Line-out, and Mic-in) as intro-

duced below.

• Line-in Jack (Light Blue), optional

This jack is used to connect any audio devices such as Hi-fi set, CD player, tape player,

AM/FM radio tuner, synthesizer, etc. This jack is only available upon request.

• Line-out Jack (Lime)

This jack is used to connect a headphone or external speakers.

• Mic-in Jack (Pink)

This jack is used to connect an external microphone.

BIOS Setting

Configure these Audio devices in the Chipset menu (“PCH-IO Configuration” > “HD Audio Con-

figuration”) of the BIOS. Refer to the chapter 3 for more information.

Driver Installation

Install the audio driver. Refer to the chapter 4 for more information.

Front Audio

The Front Audio internal connector allows you to connect to the second line-out and mic-in

jacks that are at the front panel of your system. The pin assignments are listed below.

Pin Assignment

Mic2-L

GND

Mic2-R

ACZ_DET#

Line2-Out-R

Mic2-JD (sense)

GND

KEY

Line2-Out-L

Line2-JD (sense)

Line-out

Line-

in (optional)

Mic-in

Front Audio (Internal I/O)

Front Audio Pin Assignment

Rear I/O Ports

Содержание CS636-C246










































































Результаты поиска

Содержание CS636-C246

Отзывы:

Похожие инструкции для CS636-C246

Бренды по названию

Популярные бренды

DFI CS636-C246, Руководство пользователя

Результаты поиска

Содержание CS636-C246

Отзывы:

Похожие инструкции для CS636-C246

Бренды по названию

Популярные бренды