17
Chapter 2
HARDWARE INSTALLATION
User's Manual |
CS103
X
Rear I/O Ports
LAN 1
LAN 2
DC-In
4 x USB 3.1
2 x DP++
The rear panel I/O ports consist of the following:
•
2 DP++ ports
•
1 DC-In, optionally internal vertical 4-pin connector
•
2 RJ45 LAN ports
•
4 USB 3.1ports, Gen2 for C246/Q370, Gen1 for H310
X
Rear I/O Ports
DC In coaxial
Connect a coaxial DC power cord to the rear coaxial connector for DC supply. The vertical 4-pin
type is avaible upon request.
DC In coaxial
4-pin vertical (optional)
Important:
Using a voltage higher than the recommended range may result in failure in start-
ing and booting the system or causing irreversible damage to the system board.
A power adaptor/converter is necessary when the power source on site does not
comply with the power specifications of the board.
9~36V DC-In
