34
2
Hardware Installation
1
1
1
1
Audio
Codec
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2.5.1 PS/2 Mouse and PS/2 Keyboard Ports
The system board is equipped with an onboard PS/2 mouse
(Green) and PS/2 keyboard (Purple) ports - both at location CN1
of the system board. The PS/2 mouse port uses IRQ12. If a mouse
is not connected to this port, the system will reserve IRQ12 for
other expansion cards.
Warning:
Make sure to turn off your computer prior to connecting or
disconnecting a mouse or keyboard. Failure to do so may
damage the system board.
Wake-On-Keyboard/Mouse
The Wake-On-Keyboard/Mouse function allows you to use the
keyboard or mouse to power-on the system. To use this function:
•
Jumper Setting:
JP1 must be set to “2-3 On: Enabled”. Refer to “Jumper Settings
for Wake-On-Keyboard/Wake-On-Mouse” in this chapter for
more information.
•
BIOS Setting:
“Keyboard/Mouse Power On” in the Power Management Setup
submenu of the BIOS must be set accordingly. Refer to chapter
3 for more information.
PS/2 Mouse
PS/2 Keyboard
W
.
.
.
.
.
.
.
.
