DF-models Sky Watcher 9220, Инструкция по эксплуатации

Страница: 22 / 30

9.Emergency Stop:
Only stop motors mid-flight in an emergency situations,
Doing so can reduce the risk of damage or injury.
Resetting the drone
1. Turn on the drone & controller, place the drone on a flat ground
(it is very important), then push the left throttle of the controller up &
down once to pair with the drone.
2. Then push both left & right throttle of the controller to the left-down
corner (7 o'clock direction). This will reset the drone to its original
factory settings & will be ready to fly again.
Press the above two buttons on the transmitter at the same time,
the motors will stop spin immediately.
When the flight of the drone is unstable or deviated from the left and
right after take-off, the consumer can correct the gyroscope and the
flight will be more stable after the correction.
12 13
Method 1:
Method 2:
Press this button to calibrate the gyro.The LED indicator lights on the
drone will blink and turn solid which means calibration is completed.