background image

- 48 -

1

Serial number of the inverter;

2

The distributor/dealer of the inverter(if available);

3

Installa�on date;

4

The discrip�on of problem(include LCD'error code and LED starus indicator lights);

5

Your contact details.

Note:

If your string inverter has any of the fault informa�on shown in Table 10-1,and

when you reset the machine and s�ll don’t solve the problem,please contact our

distributor and provide the below details:

F64

IGBT heat sink high temperature

1. Check temperature sensor. Check if firmware is suitable for 

    the hardware. Check if the inverter is its right model. 

2. Restart the inverter, if the fault s�ll exists, contact your 

    installer.

F59

AC grid V over current

Hardly appear the code. Never ever happened so far.

F60

AC grid W over current

Hardly appear the code. Never ever happened so far.

F61

Reactor A phase over current

Hardly appear the code. Never ever happened so far.

F62

Reactor B phase over current

Hardly appear the code. Never ever happened so far.

F63

Reactor C phase over current

Hardly appear the code. Never ever happened so far.

Error code

Description

Ongrid - Three Phase

Table10.1 Error codes and their solu�ons

Содержание SUN-35K-G-LV





















































Отзывы: