5.7 System Work Mode Setup Menu
Work Mode
Zero Export To Load
Zero Export To CT
Max Sell Power
Energy pattern
BattFirst
LoadFirst
System Work Mode
Solar Sell
Solar Sell
4000
Selling First
Work
Mode1
This is Battery 4 tages charge voltage.
ʏ
ʐ
This is for professional installers,you can hold default
if you do not know.
Shutdown 10%--the inverter will shutdown if the SOC is
below this.
Low Batt 20% --the inverter will alarm if the SOC is
below this.
Restart 40% --Restart level when inverter shutdown.
ʑ
Float V
55.2V
41.0V
45.0V
52.0V
-5
Absorption V
57.6V
Equalization V
58.8V
Equalization Days
Shutdown
Low Batt
Restart
TEMPCO(mV/C/Cell)
Batt Resistance
90 days
Equalization Hours
2.0
hours
25mOhms
Battery Setting
Set3
Batt
ʏ
ʐ
ʑ
Work Mode
Selling First ：It means that the excess energy has
priority in grid connection.
Zero Export To Load：It means output power according
to it consumed by the load.
Zero Export To CT ：It means output power according
to the CT position.
Solar Sell ：It means that the excess solar energy
can be integrated into the grid.
Max Sell Power 0-8000W
Energy Pattern
BattFirst--- It means solar power will charge battery first,
when battery is full then feed-out power to the
Load or Grid.
LoadFirst-- The solar energy will be used to supply the
local load first,then to charge the battery.The
redundant power will export to the public grid.
Time Of Use
Time
System Work Mode
Batt
~
~
~
~
~
~
Grid
Charge
Gen
01:00
5:00
05:00
9:00
09:00
13:00
13:00
17:00
17:00
21:00
21:00
01:00
80%
80%
80%
80%
80%
80%
Work
Mode2
ʏ ʐ
ʑ
Time of use
ʏ
ʐ
ʑ
Switch for Grid charging the battery.
Switch for Gen charging the battery.
There are six time period can be set,
each period must from small to large.
5.8 Grid Setup Menu
For California only.
Grid Setting
Grid Mode
Grid Type
General Standard
UL1741
ͥ
IEEE1547
CPUC RULE21
SRD-UL-1741
120/240V Split Phase
120/208V 3 Phase
120V Single Phase
220V Single Phase
Grid
Set1
PF
Grid Frequency
Reconnection Time
Grid Vol High
Grid Vol Low
Grid HZ High
Grid HZ Low
Grid Setting
50HZ
60HZ
1.000
60S
265.0V
185.0V
60.5Hz
59.3Hz
Grid
Set2
Grid Setting
Q(V)
FW
Normal Ramp rate
Soft Start Ramp rate
VW
V1:0.0V
Q1:0.00
Fstart:0.00Hz
Fstop:0.00Hz
Vstart:0.0V
Vstop:0.0V
0.0%/s
V2:0.0V
Q2:0.00
V3:0.0V
Q3:0.00
V4:0.0V
Q4:0.00
0.0%/s
Grid
Set3
Grid Setting
L/HVRT
L/HFRT
HV2:0.0V
HV1:0.0V
LV1:0.0V
LV2:0.0V
LV3:0.0V
0.16S
0.16S
0.16S
0.16S
0.16S
HF2:0.00HZ
HF1:0.00HZ
LF1:0.00HZ
LF2:0.00HZ
0.16S
0.16S
0.16S
0.16S
Grid
Set4
Please select the correct Grid Mode in your local area. If
you are not sure, please choose General Standard.
Please select the correct Grid Type in your local area,
otherwise the machine will not work or be damaged.
Please select the correct Grid Frequency in your local area.
UL1741&IEEE1547，CPUC RULE21，SRD-UL-1741
No need to set the function of this interface.
General Standard
You can hole this in default value。
For California only.
- 27 -
- 28 -
