Dewetron DEWE2-M13s, Техническое справочное руководство

Страница: 24 / 26

24
MAIN SYSTEM
Cooling considerations
The intake vent of the DEWE2-M13s is on the bottom of the chassis, where the cooling exhaust vent for the DEWE2-
M13s is on the rear of the chassis.
CAUTION: Adequate clearance between the chassis and surrounding equipment or blockages must
be maintained to ensure proper cooling of the chassis power supply as well as the modules
plugged into the chassis!
NOTE: When installing the DEWE2-M13s into a 19" cabinet please keep in mind that the unit is
siphoning air from the bottom (see schematic above). Due to this circumstances
5 u are required for one system (4 u = 1 u = cooling)! Otherwise the system
may overheat and could get damaged!
cool air in
hot air out
rear fr
on
t
DEWE2-M13s side view
4 u (System)
1 u (Clearance)
min. 1 u
(Clearance)
!
!