manualshive.com logo in svg

Dewetron DEWE-ORION-0824-20 Series, Техническое справочное руководство, Страница: 25 / 64

Поделиться
Скачать
Dewetron DEWE-ORION-0824-20 Series Скачать руководство пользователя страница 25

Page 25

DE-M080801E • DEWE-ORION-0824-20x • Technical Reference Manual • Printing version 1.1.2 • March 19, 2014

DEWE-ORION-0824-20x

2.5  Counter and digital I/O

2.5.1 General functionality

The DEWE-ORION-0824-20x is also suited with synchronous 32-bit advanced counters and digital inputs. 

The flexible signal routing allows easy signal connection and the usage of the same input pin for all counter 

input func tions and for digital inputs. Some pins also can be used for digital output. In addition to the basic 

counter function like simple event counting, up/down counting and gated event count ing also period time, 

pulse width, two-edge separation, frequency and all encoder measurements are sup ported. 

2.5.1.1 DEWESoft settings

In Dewesoft there are three basically functions implemented:

Event counting

Waveform timing

Sensor

2.5.2 Basic counter organisation

Figure 3 on the next page shows the principal of a counter block. Every counter channel consists basically of 

a main counter and a sub counter. 
The main counter consists of 4 inputs. The input “Armed” is needed for starting and triggering the counter. 

The basic input of a counter is the source pin. The default us age of this input is event counting. In addition to 

the gated counting mode the “GATE” input is also the stan dard input for period measurement. The AUX input 

is for special functions like up/down counting or encoder measurement.

Содержание DEWE-ORION-0824-20 Series

































































Отзывы:

Нет отзывов