Dewetron DEWE-CAM-GIGE-SPLIT-01, Техническое справочное руководство

Страница: 3 / 24

Preface
3
DEWE-CAM-GIGE-SPLIT-01 • Technical reference • Printing version 1.1.4 • December 6, 2021
Preface
Thank you!
Thank you very much for your investment in DEWETRON‘s unique data acquisition systems. These are top-quality
instruments which are designed to provide you years of reliable service. This guide has been prepared to help you
get the most from your investment, starting from the day you take it out of the box, and extending for years into the
future.
This guide includes important startup notes, as well as safety notes and information about keeping your DEWETRON
system in good working condition over time. However, this manual cannot and is not intended to replace adequate
training.
This documentation contains operating as well as safety and care instructions that must be observed by the user. Fault
-
less operation can only be guaranteed by observing these instructions.
Intended use
This product is used for connecting up to 4 DEWE-CAM-GIGE-120 or DEWE-CAM-GIGE-50-HD cameras with an integra -
ted Gigabit Ethernet interface switch. This small rugged box comes with an installed power supply for up to 4 cameras.
System overview
The picture below shows an overview of the device and its connections and ports.
INFORMATION
The amount and location of the connectors might vary from system to system and depend on the sys -
tem configuration.
1
2
3
4 8
6
7
9
5
Fig. 1: DEWE-CAM-GIGE-SPLIT-01 overview
1. Power supply input (EGJ.2B.30 2 )
2. Fuse for power supply (20 A)
3.
Screw for fixing aid
4. Remote power-on switch
5. Power supply output for accessories (12 V
DC
)
LEMO EGG.1B.302
6. Camera TRG/POW connector (EGG.1B.305)
7. TRG In / Remote On connector
8.
System / alert LEDs (of integrated switch)
9. GBit LAN interface connectors