Carhartt Workshop Quick Start Guide
DeWalt Oscillating Multi-Tool DCS355D1
Information pertinent to setup:
This tool is intended to be used for detail sanding, plunge cutting, flush cutting, removal of
excess materials and surface preparation.
Do not use in wet conditions or in the presence of flammable gas or liquid.
Tool comes with sanding head, wood blade, depth guide, and universal adaptor nut with
washer.
Make sure area is well ventilated as this tool can produce airborne debris.
Information pertinent to usage:
Ensure you know where electrical and power lines are before cutting into floors, walls, or any
other area.
This tool features a quick-change accessory system. This allows for faster accessory changes
without the need for wrenches or hex keys like other oscillating tool systems.
*Before Changing attachments always disconnect from power and remove battery
o
1. Grasp the tool and squeeze the accessory clamping lever (C) as shown in Figure 3.
o
2. Clean any residual debris from the tool shaft and the accessory holder.
o
3. Slide the accessory between the shaft (J) and the accessory holder making sure the
accessory engages all eight pins on the holder and is flush with the shaft.
o
4. Release the accessory clamp lever.
