DeWalt DWE886P, Оригинальное руководство пользователя

Страница: 10 / 32

Cleaning
WARNING: Blowing dust and grit out of
motor and switch actuator using clean,
dry compressed air is a necessary regular
maintenance procedure. Dust and grit
containing metal particles often accumulate
on interior surfaces and could create an
electrical shock or electrocution if not
frequently cleaned out. It is recommended
that a ground fault circuit interrupter (GFCI)
is utilized to further protect the user from
electric shock resulting from the accumulation
of conductive particles. If the tool is
deactivated by the GFCI, unplug the tool and
ENGLISH
8
check and clean the tool before resetting the
GFCI. ALWAYS WEAR SAFETY GLASSES
(ANSI Z87.1) when cleaning or using this tool.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts
of the tool. These chemicals m ay weaken
the plastic materials used in these parts.
Use a cloth dampened only with water and
mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into
a liquid.
Lubrication
Your power tool requires no additional lubrication.
Motor Brushes
DWE886
Please contact your local service center to inspect
brushes.
Accessories
WARNING: Since accessories, other
than those offered by DeWalt, have not
been tested with this product, use of
such accessories with this tool could be
hazardous. To reduce the risk of injury, only
DeWalt, recommended accessories should
be used with this product.
Recommended accessories for use with your tool
are available at extra cost from your local dealer or
authorized service center. If you need assistance
in locating any accessory, please contact DeWalt
Industrial Tool Co., nearest to you or visit our website
www.dewalt.com.
WARNING: To reduce the risk of injury, always
use proper guards when grinding and wear
eye protection.
ACCESSORY FOR DIE GRINDERS
Mounted Stones and Points
Repairs
To assure product SAFETY and RELIABILITY, repairs,
maintenance and adjustments (including brush
inspection and replacement) should be performed by
a DeWalt factory service center, a DeWalt authorized
service center or other qualified service personnel.
Always use identical replacement parts.