DeWalt DWE4119, Оригинальное руководство пользователя

Страница: 9 / 16

9
ENGLISH
DATE CODE POSITION (FIG. 1)
The date code (E), which also includes the year of
Example:
2018 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Angle grinder
1 Guard
1 Side handle
1 Flange set
1 Hex key
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred
• Take the time to thoroughly read and
Description (Fig. 1)
WARNING: Never modify the power
tool or any part of it. Damage or personal
A. On/off switch
B. Spindle lock button
C. Guard
D. Side handle
M. Variable Speed Dial
INTENDED USE
Your DWE4119 angle grinder has been designed
for professiona plications.
DO NOT
use under wet conditions or in the
These heavy-duty angle grinders are professional
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
• Young children and the infirm. This appliance
is not intended for use by young children or
Spanner
When using a cable reel, always unwind the
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
Soft Start Feature
The soft start feature allows a slow speed build-up
to avoid an initial jerk when starting. This feature is
No-Volt
The No-volt function stops the grinder restarting
without the switch being cycled if there is a break in
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the power supply
Your D
E
WALT tool is double insulated in
accordance with EN60745; therefore no
WARNING: 115 V units have
to be operated via a fail-safe
isolating transformer with an earth
screen between the primary and
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D
E
WALT
Using an Extension Cable
If an extension cable is required, use an approved
3–core extension cable suitable for the power input
of this tool (see Technical Data ).The minimum
conductor size is 1.5 mm
2
; the maximum length