DeWalt DW0330S, Руководство пользователя

Страница: 9 / 13

9
E
Three Year Limited Warranty
D
E
WALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date
of purchase. This warranty does not cover part failure due to normal wear or tool abuse. For further detail of warranty
coverage and warranty repair information, visit www.D
E
WALT.com or call 1–800–4-D
E
WALT (1–800–433–9258). This
warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. This
warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces.
In addition to the warranty, D
E
WALT ® tools are covered by our:
1 YEAR FREE SERVICE
D
E
WALT will maintain the tool and replace worn parts caused by normal use, for free, any time during the first year after
purchase.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your D
E
WALT Power Tool, Laser, or Nailer for any reason, you
can return it within 90 days from the date of purchase with a receipt for a full refund - no questions asked.
RECONDITIONED PRODUCT: Reconditioned product is covered under the 1 Year Free Service Warranty. The 90 Day
Money Back Guarantee and the Three Year Limited Warranty do not apply to reconditioned product.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-4-D
E
WALT
or visit your local service center for a free replacement.
Error Codes
If INFO appears on the display window with a Code number, perform the corresponding Corrective Action.
Code Description Corrective Action
101 Received Signal Too Weak,
Measuring Time Too Long
Use the target plate or change the target surface.
102 Received Signal Too High Target is too reflective. Use the target plate or change the
target surface.
201 Too Much Background Light Reduce the background light on the target area.
202 Laser Beam Interrupted Remove the obstacle and repeat the measurement.
203 Insufficient Power Replace the batteries.
301 Temperature Too High Allow the device to cool down to a temperature within the
specified Operating Temperature Range .
302 Temperature Too Low Allow the device to warm up to a temperature within the
specified Operating Temperature Range .
401 Hardware Error Switch the device on/off several times. If the error still occurs,
return the defective device to the Service Center or distributor.
Refer to the Warranty .
402 Unknown Error Contact the Service Center or distributor. Refer to the Warranty .